Rig Wash is designed to clean, long haul rigs, oilrigs, car wash facilities. Rig Wash is ideal for cleaning on and off-shore drilling rigs and equipment. Use it for continued maintenance of platforms, decks, derricks, racks, liners, casing, drills, bits and rods. It’s ideal for PC pumps, ESP pumps, pump jacks, pump pads, crown & traveling blocks, blowout preventers and more. RIGWASH can be diluted: 1 part concentrate with 10-20 parts water for general light cleaning. For heavy duty cleaning dilute 1 part RIGWASH with 5-10 parts water depending on soil. Note: Soil conditions will vary, therefore trial of different dilution rates is recommended to determine proper dilution for the job. Directions – Apply by pressure wash, brush, mop or spray. Dilution rates depend on the type of contamination and the degree of soiling, the type of crude and its location as well as the type of oil/pseudo-based mud systems used. Can be diluted with fresh or seawater. We recommend for heavy duty cleaning: 1 to 5, general cleaning: 1 to 10, light degreasing: 1 to 40-80.